This Topic will discuss about Pathloss 5.0. Pathloss 5.0 is new software manufactured by Cte and already published at march 2009. Pathloss 5.0 last update is 27^th October 2009.

First step you need to do for running pathloss 5.0 on your machine is installing pathloss.

CHAPTER 1 : STEP BY STEP INSTALL PATHLOSS 5.0

1. Click pathloss 5.0 windows installer package
2. Choose typical installation, and click next until installation finished
3. After installation finished, pathloss 5.0 will shown on your program files

Figure 1. Pathloss 5.0 at program files list

Pathloss 5.0 have 4 module at program files. There are:

1. Antrad : This program to convert antenna data base, radio data base, etc

Figure 2. AntRad Module

b. Convert 24Bit : Convert image that can be used as backdrop image for pathloss 5.0

Figure 3. Convert 24 Bit Module

c. Pathloss 5.0 : as like newtwork module on pathloss 4.0

Figure 4. Pathloss 5

Figure 5. Pathloss 5.0 Link Module

When your pathloss not initialized yet, only module AntRad can be used, and for another 3 module disabled. Next step for installation pathloss is

1. Initialized Program

First step you need to enter your pathloss serial number that already sent with your pathloss installation package. After enter your pathloss installation serial number, you will ask to activate yout pathloss. There is 3 option to activate your serial number. You can choose by phone, by email, or by internet (online). After finished your program activation you will able to know your pathloss installation support. This pathloss installation support can check at help menu.

Figure 6. Pathloss License Information

Note : I need to hiding my serial number to keep my privacy ^_^.

Pathloss 5.0 Have a good terrain looked. have 3 D view and More detail about topology map....I'll discuss for next Chapter..and For Chapter 1 i thing enough ^_^

Figure 7. Terrain view at Pathloss 5.0